* Patented *
  • Full size image

EZ Sensor Cleaning Kit
DUALPOWER-X Extra Strength  

Wet Cleaning Guide    DSLR Sensor Size Chart

EZ Sensor Cleaning Kit DUALPOWER-X Extra Strength 1.6 x / 16 mm
SKU: 17741820
UPC: 713179288901
EAN: 0713179288901
Part number: VD-17741820

EZ Sensor Cleaning Kit DUALPOWER-X Extra Strength 1.3 x / 20 mm
SKU: 17741818
UPC: 713179288895
EAN: 0713179288895
Part number: VD-17741818

EZ Sensor Cleaning Kit DUALPOWER-X Extra Strength 1.0 x / 24 mm
SKU: 17741815
UPC: 713179288888
EAN: 0713179288888
Part number: VD-17741815

    Enhancements
  • More versatile than single liquid
  • Switching liquids enhances cleaning
  • Better value than single liquid
  • Easier to remove tough stain

Most current sensor technology utilizes water repellent hydrophobic coating to reduce stain mark. Vdust Plus™ is an excellent alcohol based cleaning solution with fast evaporating quality ideal for removal of water stain, compatible with hydrophobic sensor coating. However, alcohol has poor cleaning quality for most common type of stains such as heavy lubricant and tough organic materials. In the other hand, Smear Away™ is the most powerful cleaning solution to remove and dissolve even the toughest stains from the sensor surface.

Since it is water based slight over saturation of the swab creates streaks due to the hydrophobic nature of sensor coating. With dual power, if any streaks appears due to Smear Away™, either reduce over-saturation of the swab by using less liquid, allow more evaporation time or simply use Vdust Plus™ with a new swab to remove water streaks.

Since simple visual inspection can not determine the nature of stain light or heavy, first start with either liquid, if stain is removed, Stop. Otherwise switch liquid, use a new swab proceed with cleaning. Do not add two liquids on the same swab. Use each liquid with separate swab. Always swab in the same direction.

Smear Away™ strong anti fog capability, very strong anti static capability, removes smear on first swipe, anti scratch components prevents contaminants from scratching the sensor while cleaning, very strong oil and lubricant remover, removes the toughest stain, non flammable, non alcoholic, pollen remover, best used with Ultra MXD-100 green Vswab®.

VDust Plus™ multi ingradient, Iso alcoholic solution, removes oil fast, evaporates fast, streak free motion compatible with both DHAP orange and Ultra MXD-100 green Vswab.

Green MXD-100 Vswab® patented V shape results best maneuverability inside chamber, V shape results in homogeneous motion, it cleans corner the best due to its V shape, compatible with all three solutions, multi fabric ensures best results for oil and smear removal, its soft texture is safe on coated sensor, best used for fluorine coated sensor, streak free motion.

    This Kit includes:
  • Green Vswabs® size specific (5 per pack)
  • Liquid cleaner Smear Away™ (1.15 ml)
  • Liquid cleaner VDust Plus™ (1.15 ml)
In stock! Order now!
Cautionary Note

Visibledust sensor cleaning solutions and swabs are calibrated to work together to produce optimal and safe results. Please DO NOT USE alternative solutions with our swab. A simple grain of quartz which is found in cheaper solutions are enough to produce an expensive scratch on the low pass filter. Our solutions are manufactured to the highest standard of quality that is practiced in pharmaceutical industries.

Visibledust solutions are calibrated for NORMAL evaporative rates:

  1. to keep the swab moist at all time to reduce the risk of scratch
  2. to increase the cleaning power, less swabbing more economical
  3. to reduce friction by being moist all time during swabbing

The potential risk of FAST evaporative solutions used as sensor cleaning are the following:

  1. an increase in the risk of damage and stress to sensor coating by using premature dry swab
  2. a great reduction in cleaning power by shortening the contact time between contaminants and solution due to the increased evaporation rate of the solution
  3. increase in friction by using a premature drying swab, resulting in static charge build up leading to an even greater dust accumulation on the sensor

Our cleaning liquids are intended to be placed on the swab first, so the concern for liquid seeping through the sensor is not valid or accurate. On the other hand, the disadvantages of a generic brand or FAST evaporative liquid used for sensor cleaning may in fact may casue damage to the sensor by requiring repeat swabbing and is not recommended.

CHOOSE SWAB SIZE:
 1.6x (16 mm) Swab Size
 1.3x (20 mm) Swab Size   
 1.0x (24 mm) Swab Size
$32.00 CAD
$24.61 USD*  |  €27.20*    
(* approximate price)
Recommended Products: